Kubernetesの基本を学ぶ

セットアップ

Kubernetes v1.14 のドキュメントは積極的にメンテナンスされていません。現在表示されているバージョンはスナップショットです。最新のドキュメントはこちらです: 最新バージョン

Edit This Page

kubeadmのインストール

This page shows how to install the kubeadm toolbox. For information how to create a cluster with kubeadm once you have performed this installation process, see the Using kubeadm to Create a Cluster page.

始める前に

MACアドレスとproduct_uuidが全てのノードでユニークであることの検証

It is very likely that hardware devices will have unique addresses, although some virtual machines may have identical values. Kubernetes uses these values to uniquely identify the nodes in the cluster. If these values are not unique to each node, the installation process may fail.

ネットワークアダプタの確認

If you have more than one network adapter, and your Kubernetes components are not reachable on the default route, we recommend you add IP route(s) so Kubernetes cluster addresses go via the appropriate adapter.

必須ポートの確認

マスターノード

Protocol Direction Port Range Purpose Used By
TCP Inbound 6443* Kubernetes API server All
TCP Inbound 2379-2380 etcd server client API kube-apiserver, etcd
TCP Inbound 10250 Kubelet API Self, Control plane
TCP Inbound 10251 kube-scheduler Self
TCP Inbound 10252 kube-controller-manager Self

ワーカーノード

Protocol Direction Port Range Purpose Used By
TCP Inbound 10250 Kubelet API Self, Control plane
TCP Inbound 30000-32767 NodePort Services** All

** Default port range for NodePort Services.

Any port numbers marked with * are overridable, so you will need to ensure any custom ports you provide are also open.

Although etcd ports are included in master nodes, you can also host your own etcd cluster externally or on custom ports.

The pod network plugin you use (see below) may also require certain ports to be open. Since this differs with each pod network plugin, please see the documentation for the plugins about what port(s) those need.

ランタイムのインストール

Since v1.6.0, Kubernetes has enabled the use of CRI, Container Runtime Interface, by default. The container runtime used by default is Docker, which is enabled through the built-in dockershim CRI implementation inside of the kubelet.

Other CRI-based runtimes include:

Refer to the CRI installation instructions for more information.

kubeadm、kubelet、kubectlのインストール

You will install these packages on all of your machines:

kubeadm will not install or manage kubelet or kubectl for you, so you will need to ensure they match the version of the Kubernetes control plane you want kubeadm to install for you. If you do not, there is a risk of a version skew occurring that can lead to unexpected, buggy behaviour. However, one minor version skew between the kubelet and the control plane is supported, but the kubelet version may never exceed the API server version. For example, kubelets running 1.7.0 should be fully compatible with a 1.8.0 API server, but not vice versa.

警告: These instructions exclude all Kubernetes packages from any system upgrades. This is because kubeadm and Kubernetes require special attention to upgrade.

For more information on version skews, see:

apt-get update && apt-get install -y apt-transport-https curl
curl -s https://packages.cloud.google.com/apt/doc/apt-key.gpg | apt-key add -
cat <<EOF >/etc/apt/sources.list.d/kubernetes.list
deb https://apt.kubernetes.io/ kubernetes-xenial main
EOF
apt-get update
apt-get install -y kubelet kubeadm kubectl
apt-mark hold kubelet kubeadm kubectl

cat <<EOF > /etc/yum.repos.d/kubernetes.repo
[kubernetes]
name=Kubernetes
baseurl=https://packages.cloud.google.com/yum/repos/kubernetes-el7-x86_64
enabled=1
gpgcheck=1
repo_gpgcheck=1
gpgkey=https://packages.cloud.google.com/yum/doc/yum-key.gpg https://packages.cloud.google.com/yum/doc/rpm-package-key.gpg
exclude=kube*
EOF

# Set SELinux in permissive mode (effectively disabling it)
setenforce 0
sed -i 's/^SELINUX=enforcing$/SELINUX=permissive/' /etc/selinux/config

yum install -y kubelet kubeadm kubectl --disableexcludes=kubernetes

systemctl enable --now kubelet

Note:

  • Setting SELinux in permissive mode by running setenforce 0 and sed ... effectively disables it. This is required to allow containers to access the host filesystem, which is needed by pod networks for example. You have to do this until SELinux support is improved in the kubelet.

  • Some users on RHEL/CentOS 7 have reported issues with traffic being routed incorrectly due to iptables being bypassed. You should ensure net.bridge.bridge-nf-call-iptables is set to 1 in your sysctl config, e.g.

    cat <<EOF >  /etc/sysctl.d/k8s.conf
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
EOF
sysctl --system

  • Make sure that the br_netfilter module is loaded before this step. This can be done by running lsmod | grep br_netfilter. To load it explicitly call modprobe br_netfilter.

Install CNI plugins (required for most pod network):

CNI_VERSION="v0.6.0"
mkdir -p /opt/cni/bin
curl -L "https://github.com/containernetworking/plugins/releases/download/${CNI_VERSION}/cni-plugins-amd64-${CNI_VERSION}.tgz" | tar -C /opt/cni/bin -xz

Install crictl (required for kubeadm / Kubelet Container Runtime Interface (CRI))

CRICTL_VERSION="v1.11.1"
mkdir -p /opt/bin
curl -L "https://github.com/kubernetes-incubator/cri-tools/releases/download/${CRICTL_VERSION}/crictl-${CRICTL_VERSION}-linux-amd64.tar.gz" | tar -C /opt/bin -xz

Install kubeadm, kubelet, kubectl and add a kubelet systemd service:

RELEASE="$(curl -sSL https://dl.k8s.io/release/stable.txt)"

mkdir -p /opt/bin
cd /opt/bin
curl -L --remote-name-all https://storage.googleapis.com/kubernetes-release/release/${RELEASE}/bin/linux/amd64/{kubeadm,kubelet,kubectl}
chmod +x {kubeadm,kubelet,kubectl}

curl -sSL "https://raw.githubusercontent.com/kubernetes/kubernetes/${RELEASE}/build/debs/kubelet.service" | sed "s:/usr/bin:/opt/bin:g" > /etc/systemd/system/kubelet.service
mkdir -p /etc/systemd/system/kubelet.service.d
curl -sSL "https://raw.githubusercontent.com/kubernetes/kubernetes/${RELEASE}/build/debs/10-kubeadm.conf" | sed "s:/usr/bin:/opt/bin:g" > /etc/systemd/system/kubelet.service.d/10-kubeadm.conf

Enable and start kubelet:

systemctl enable --now kubelet

The kubelet is now restarting every few seconds, as it waits in a crashloop for kubeadm to tell it what to do.

マスターノードのkubeletによって使用されるcgroupドライバの設定

When using Docker, kubeadm will automatically detect the cgroup driver for the kubelet and set it in the /var/lib/kubelet/kubeadm-flags.env file during runtime.

If you are using a different CRI, you have to modify the file /etc/default/kubelet with your cgroup-driver value, like so:

KUBELET_EXTRA_ARGS=--cgroup-driver=<value>

This file will be used by kubeadm init and kubeadm join to source extra user defined arguments for the kubelet.

Please mind, that you only have to do that if the cgroup driver of your CRI is not cgroupfs, because that is the default value in the kubelet already.

Restarting the kubelet is required:

systemctl daemon-reload
systemctl restart kubelet

トラブルシュート

If you are running into difficulties with kubeadm, please consult our troubleshooting docs.

次の項目

フィードバック